Scale Parts & Components | PENINSULA SCALE

Floor Scale Levelling Foot - 2 - 3/8" Diameter Swivel Ball & Cup - 1/2 20 Thread Size

Standard floor scale levelling foot with 1/2-20 thread pitch and size is the most common for floor scales in the USA

$ 37.00

Floor Scale Homerun Summing Cable Barrel Connector Pin out to Junction box terminals

Cable - Triner Scale - 5 Pin round to bare - 15 feet long - .250 Diameter

Braided with clear protective liner, Home Run Scale Instrument to Scale Deck Cable. The Female connector is designed to mate with 2mm male pins on the instrument side

$ 94.00

Levelling Foot - Triner - Molded Rubber

$ 26.00

CAS CL5500 Thermal Print Head

Thermal print head for CL5500 Deli Scale

$ 350.00

Clear Plastic Protective Cover - Locosc LP7510 / LP7510A / Triner 700 SSB MS / Weigh South WS-10

Plastic cover that sits over the keypad and display to keep the buttons and screen from becoming dirty and damaged. These are semi-disposable, meant to be used for several months and then replaced once dirty or destroyed to prolong the life of the scale instrument

$ 14.50

Rough Deck BDP - Portability Frame

Mild Steel Portability Frame

$ 1,170.00

Floor Scale Levelling Foot Capture Plate | Anti-Sliding Protection

Floor Scale Levelling Foot Capture Plate | Set of 2 plates | Anti-Sliding Protection

3.19" hole diameter Anti-Sliding Plate for Floor Scale Levelling Feet - Plain Carbon - Painted Grey

$ 38.00

Vulcan Onboard Orange "Stress Flex" VSL Scale Cable

$ 0.00

Junction Box Card, Rice Lake Wheel Chair Scale Models 350-10, -2 & -3

Summing junction box card for Rice Lake Wheel Chair Scales Model 350 health scales -10, -2 and -3 variants

$ 53.00

Ravas IJack-40 Replacement Battery Pack

Replacement Lithium Ion battery pack

$ 3,754.64

Levelling Foot Kit - Avery Weigh-Tronix - OEM Part Number: AWT05-800075

AWT05-80007
This Part number contains a Quantity of six(6) Levelling Feet (Black or Blue)

Stainless Steel - M0.31-18UNC Thread - Stainless Steel M0.31-18UNC Jam Nuts

This is for the levelling foot kit only, not the entire scale base.

The black feet we have far more in stock, the blue feet are limited stock

Link to the Avery Weigh-Tronix torsion scale base literature:

$ 68.00 ~~$ 75.00~~

Rice Lake UJB3T6 - Transient Protection Enclosure and PCB

UJB-3T6 Load Cell Protection

$ 495.00

Rice Lake Keypad Overlay, Laserlight2

Membrane switch panel, 4in x 6-1/2in Overall Dimensions

$ 34.00

Emery Winslow B-24746-13DK Diaphragm (with O-Ring)

Replacement Rubberized Diaphragm and "O" ring Kit for
Emery Winslow hydraulic/Hydrostatic Low Profile Load Cells
102S LOW PROFILE COMPRESSION LOAD CELLS NTEP # 09-106

Specifically for Cell Model Numbers:
102S-5.0
102S-10.0

$ 275.00

136-20-RB Emery Winslow Load Cell

Hydrostatic, 304 Stainless Steel, NTEP # 88-239A2 - With Head Assembly - 25SqIn.

$ 2,960.00

Terminal Block Set of 7 with End Plates Weidmuller Z series (Emery Winslow EW)

Terminal block found inside Emery Winslow scale enclosures that join the 110vac power, loadcell signal and data output cables into the scale indicator

$ 45.00

Loadcell Stands for CG-STR | Epelsa STR | First Weigh LC32 with 3.36" Height

3.36 inch from bottom of the loadcell support pin to ground level.

Carbon Steel, Epoxy Painted Black, Levelling bolts for grouting included. Drilled and tapped 1/4-28 hole for ground straps.

$ 520.00

Terminal Block Set of 11 terminals with End Plates Weidmuller Z series (Emery Winslow EW)

Terminal block found inside Emery Winslow scale enclosures that join the 110vac power, loadcell signal and data output cables into the scale indicator

$ 55.00

Emery Winslow Hydrostatic Loadcell Fluid

Specialized fluid for temperature ranges and animal safety

$ 65.00

Fairbanks Pit Power Supply with Enclosure

FB2550-8/FB3300/FB4000/FB7100

$ 647.00