Cable - Triner Scale - 5 Pin round to bare - 15 feet long - .250 Diameter
Braided with clear protective liner, Home Run Scale Instrument to Scale Deck Cable. The Female connector is designed to mate with 2mm male pins on the instrument side
These cables plug into the base of your scale instrument (commonly found on lower cost floor scales) with the round 5 pin plug. The other end is terminated into the junction box terminals within the scale base.
These are the most common connector cables for floor scales you might find on other brands from Uline scale, Optima Scale, Indiana scale, Locosc Scale for the LP-7510 scale indicator or similar variants.
The 5-pin scale cable connector looks like this:
The bare end of the floor scale home run cable that mounts into the junction box close up looks like this:
The Pinout to connect this cable is found in the main product images
Red on pin #1 in the barrel connector is excitation positive
Green on pin #2 in the barrel connector is signal positive
White on pin #3 in the barrel connector is signal negative
Black on pin #4 in the barrel connector is Excitation positive
Yellow (or bare) on pin #5 in the barrel connector is shield or ground